MJ-Garage

Track Day at Cresson - 05-17-10

Jan

Dim lights Embed Embed this video on your site

Video taken by: MrRob600rr

 

This was a video that a fellow track day rider took, unbeknownst to me, while I was adjusting to my new rearsets. My whole intention on this day was to find the ideal peg position for these new rear sets, and to make GP shift a part of muscle memory, rather than something I had to think about.

 

One of the first things that I noticed with the rear sets was that I had a lot more weight over the front end of the bike. This made the bike was to steer a lot quicker. I should also mention that I had never ridden at Cresson on slicks before. Slicks have a much different profile than even DOT race tires. They're much more aggressive. One of the first things I noticed then I got these tires initially was that the bike would literally want to fall over. It would 'flop' into the corners much easier than ever before. I thought I had adjusted to this already at previous track days. However, it was quite apparent that I had even more adjusting to do given the new set up at Cresson. Having not ridden on these tires before at this track, I was having to adjust to different turn in points than I was used to in the past, having to hold the bike differently in the corners due to it wanting to 'fall' over, and having the bike steer quicker due to more weight on the front end. All of these things added up to me decided to just take a step back and slow down. I decided to just focus on not missing shifts, my foot position on the new pegs and peg pressure, relearning my turn in points, and learning how much effort I need to put into counter steering, tank pressure with my knees, how much to hang off the bike in each corner due to more lean angle, brake points, turn in points, clip points, etc.

 

There's a lot of folks out there who wouldn't put that much thought into it, and who would probably get done reading all of that and think I'm over thinking, and over reacting to what could be considered minor changes. My response to that is that it's what's made the difference for me. I'm analytical by nature. At the end of any track day I look back at what I've just done, what I learned, if I walked away feeling like I've improved on what I set out to improve on and if I feel like I gave it my all.

 

Unlike some other folks out there, I'm not out there to just blow off steam, though, that's a rather large chunk of the reason that I'm out there! I'm out there to try and improve upon my skills, and I take it pretty seriously, all the while, I'll have a huge grin on my face.

Last Updated ( Monday, 09 August 2010 17:52 )
 

Why the Chevy HHR is a POS

Jan

Yes, the Chevy HHR is an utter POS.  Then why do we even have one you ask?  It's a rental.  We are currently without a truck or a car.  The GTi has about 160k miles on it and is having some random issues dying while we are driving.  After doing a quick online search, we found a few other people with the same issue who have spent a few thousand dollars at dealerships trying to diagnose the issue and never posted the outcome.  Since we're not exactly able to cough up a few thousand dollars at the moment, we figured we would give it a go to troubleshoot it ourselves.  So we're renting a vehicle at the moment.

 

Monte brought this thing home on Friday while I was working.  I happened to be telecommuting that week, so I had the privilege of getting to ride in it on the way to lunch that day.  I can say this much, it's red.    If you know me, you know how much I like red. 

 

On to initial impressions:  I promise, I didn't have any preconceived notions of this ride in the least.  I had never ridden in one before, and other than not really being fond of Chevrolet due to their lack of a quality interior, I've had no real issues with their vehicles.  They build a rock solid drive train, that's for certain.  I opened the door to this thing and the first thought I had was that Chevrolet must have stock in Rubbermaid.  The entire front section of the car is the same texture.  It all looks like the lid to a Rubbermaid container, possibly even a trash can lid.

 IMAG0022

Last Updated ( Monday, 09 August 2010 15:27 )
 

Dallas MS150

Jan

Monte and I rode in the Dallas MS150 this past weekend.  This ride went from Frisco to the Texas Motor Speedway on day 1, then from the Texas Motor Speedway to Ft. Worth on day 2.  Unfortunately, we had some pretty nasty weather roll through on day 2 and they ended up canceling hte second leg.

 

The first leg went great though!  We signed up to be ride marshals with the Lifetime Fitness/Sun & Ski sports team out of the Sun & Ski Sports Frisco location.

 marshals

 

Dave, Jim, myself, and Monte decided to do this ride together.  Here we are at packet pick-up the day before.

 

All along the route, there were these video cameras that apparently were triggered by the passing of cyclist.  Here's a few of the videos from the ride as our group passed by:

 

Here's our team going over the dam at Lake Ray Roberts.

Lifetime Fitness/Sun & Ski going through Krum

At the finish line on day 1

 

Pretty cool to watch our large group pass by on camera!  We were booking it through most of the route at around 20-22mph.  The ride was a blast, the group was great, and it was all for a great cause!!!

 

DSC_2675

 

Here is the Garmin information from Day 1:

Last Updated ( Tuesday, 03 May 2011 14:45 )
 

Shark RSR2 v. RSi Helmet Comparison

Jan

SharkHelmets-Logo

 

I've owned my red Shark Fujiwara RSR2 helmet for about 5 years now.  From the moment that I put the helmet on my head, I knew I had found the helmet that I would be sticking with for quite some time.  However, as many of you may have picked up on in that first sentence, I've had that helmet for 5 years.  That means it's time to look for a replacement.   Even if you've never been down in the helmet, or even if you've never dropped it, the age of the helmet alone means degradation of materials.  If it's my head in there, I'm not risking it!

 

Last Updated ( Monday, 16 August 2010 16:04 )
 

Health Care Crisis

Jan

Recently I was involved in a discussion about the health care situation in this country. I don't claim to be a well versed individual when it comes to this stuff. Not even by a long shot. It's far too complex and convoluted for me to even pretend that I'm 'up to speed' on the different aspects of the bills that have recently been passed by our lovely bureaucracy. However, this doesn't change the fact that I believe that there is a root cause to our health care crisis. If you've read my previous article: The State of Our Food, you probably already have a pretty good idea of where I'm headed with this.

 

Rather than putting band aids on the problems, why don't we fix the problems at their roots? The health care issue crisis in this country can be traced back to poor understanding of basic human health needs.

 

Just yesterday at work, our managers brought in yet ANOTHER batch of sugar in the form of an ice cream cake to 'thank' us for our hard work. This in a long, long line of nutrition deprived foods that they have been bringing us to 'thank us' for our efforts. Upon declining a slice of cake for the billionth time, my boss asked me why I never partake. My response was that I choose to eat in such a way that I can help to ensure that my future will be healthy. At this point, another coworker responded with: "at this rate, we'll all have type two diabetes in the next two years." My boss' response? "You have to eat like this every single day to get type two diabetes."

 

Last Updated ( Monday, 09 August 2010 15:44 )
 


Page 1 of 6

Strava

Twitter

Ads

Visitors

Total visitors:6687